Ranges

Upper burners have 6 burners. The oven section can optionally be used as an electric static oven or gas static oven. Gas ovens have piezo lighter ignition. In gas open hearths and gas ovens, gas taps with safety devices and thermocouples are used for flame control. All cooktops and cooktops have 2 mm thick monoblock tops produced using special molds using the press printing method. Rounded corners on the top table increase durability and provide ease of cleaning. Burners made of specially designed brass material have high power, high combustion efficiency and low gas emission values. Thanks to the pilot flame system in the burners, it is possible to use the devices quickly and easily. With the thermostatic gas valve, the internal temperature of the gas oven can be controlled between 100-300 °C, and in electric ovens, the internal temperature of the electric oven can be controlled between 50-300 °C with the thermostat. The oven interior is made of AISI 430 stainless steel. Removable chrome-plated slides inside the oven allow cooking at 3 different oven shelf levels. To increase the insulation of the oven, special molds with a thickness of 40 mm, resistant to heavy conditions and an ergonomic handle, and an oven door made of stainless steel produced by the press printing method were used. Stainless steel micro-hole oven burner provides maximum efficiency and increases oven temperature quickly. In 6-burner cookers, an oven of GN 2/1 size can be used, or optionally a large oven with an internal size of 1060x550x275 can be made. In the oven section of the galleys, heat is prevented from escaping with the door and the duct and slot system made by pressing against the door. Thus, the need for additional silicone gaskets used in ovens is eliminated. Each stove burner has cast iron to place pots or pans on the stove. The stove cast iron is dishwasher-safe thanks to its semi-polished and durable enamel coating.

In all electric cookers and cooktops, 1.5 mm thick 304 quality stainless steel monoblock top tables, produced using special molds and press printing method, are used, thus increasing the durability of the top table and ensuring ease of cleaning. The plates made of cast material are combined with the press-pressed upper table in a sealed manner. There is an overheat thermal in each hot plate. This thermal hot plate prevents damage to the hot plate by cutting off the electricity when it overheats, and automatically activates the system when the excessive heat disappears. Each hot plate has a 6-position switch that allows it to be controlled between 90-450 °C. Thanks to this temperature control, the user can perform applications such as cooking or holding. There are separately controllable lower and upper heaters in the oven section. With the 3-position switch, the lower heater, upper heater and lower and upper heater can be operated in the same positions. There is a thermostat that controls the oven internal temperature between 50-300 °C. The oven interior is made of AISI 430 stainless steel. Removable chrome-plated slides inside the oven allow cooking on 3 different shelf levels. In the oven section of electric cookers, heat is prevented from escaping with a door and a duct and slot system made by pressing against the door. Thus, the need for additional silicone gaskets used in ovens is eliminated. GN 2/1 sized oven can be used in 12090 electric range cookers, and optionally, a larger oven with 1060x550x275 internal dimensions can be built.

Upper burners have 6 burners. The oven section can optionally be used as an electric static oven or gas static oven. Gas ovens have piezo lighter ignition. In gas open hearths and gas ovens, gas taps with safety devices and thermocouples are used for flame control. All cooktops and cooktops have 2 mm thick monoblock tops produced using special molds using the press printing method. Rounded corners on the top table increase durability and provide ease of cleaning. Burners made of specially designed brass material have high power, high combustion efficiency and low gas emission values. Thanks to the pilot flame system in the burners, it is possible to use the devices quickly and easily. With the thermostatic gas valve, the internal temperature of the gas oven can be controlled between 100-300 °C, and in electric ovens, the internal temperature of the electric oven can be controlled between 50-300 °C with the thermostat. The oven interior is made of AISI 430 stainless steel. Removable chrome-plated slides inside the oven allow cooking at 3 different oven shelf levels. To increase the insulation of the oven, special molds with a thickness of 40 mm, resistant to heavy conditions and an ergonomic handle, and an oven door made of stainless steel produced by the press printing method were used. Stainless steel micro-hole oven burner provides maximum efficiency and increases oven temperature quickly. In 6-burner cookers, an oven of GN 2/1 size can be used, or optionally a large oven with an internal size of 1060x550x275 can be made. In the oven section of the galleys, heat is prevented from escaping with the door and the duct and slot system made by pressing against the door. Thus, the need for additional silicone gaskets used in ovens is eliminated. Each stove burner has cast iron to place pots or pans on the stove. The stove cast iron is dishwasher-safe thanks to its semi-polished and durable enamel coating.

Upper burners have 6 burners. The oven section can optionally be used as an electric static oven or gas static oven. Gas ovens have piezo lighter ignition. In gas open hearths and gas ovens, gas taps with safety devices and thermocouples are used for flame control. All cooktops and cooktops have 2 mm thick monoblock tops produced using special molds using the press printing method. Rounded corners on the top table increase durability and provide ease of cleaning. Burners made of specially designed brass material have high power, high combustion efficiency and low gas emission values. Thanks to the pilot flame system in the burners, it is possible to use the devices quickly and easily. With the thermostatic gas valve, the internal temperature of the gas oven can be controlled between 100-300 °C, and in electric ovens, the internal temperature of the electric oven can be controlled between 50-300 °C with the thermostat. The oven interior is made of AISI 430 stainless steel. Removable chrome-plated slides inside the oven allow cooking at 3 different oven shelf levels. To increase the insulation of the oven, special molds with a thickness of 40 mm, resistant to heavy conditions and an ergonomic handle, and an oven door made of stainless steel produced by the press printing method were used. Stainless steel micro-hole oven burner provides maximum efficiency and increases oven temperature quickly. In 6-burner cookers, an oven of GN 2/1 size can be used, or optionally a large oven with an internal size of 1060x550x275 can be made. In the oven section of the galleys, heat is prevented from escaping with the door and the duct and slot system made by pressing against the door. Thus, the need for additional silicone gaskets used in ovens is eliminated. Each stove burner has cast iron to place pots or pans on the stove. The stove cast iron is dishwasher-safe thanks to its semi-polished and durable enamel coating.

Upper burners have 6 burners. The oven section can optionally be used as an electric static oven or gas static oven. Gas ovens have piezo lighter ignition. In gas open hearths and gas ovens, gas taps with safety devices and thermocouples are used for flame control. All cooktops and cooktops have 2 mm thick monoblock tops produced using special molds using the press printing method. Rounded corners on the top table increase durability and provide ease of cleaning. Burners made of specially designed brass material have high power, high combustion efficiency and low gas emission values. Thanks to the pilot flame system in the burners, it is possible to use the devices quickly and easily. With the thermostatic gas valve, the internal temperature of the gas oven can be controlled between 100-300 °C, and in electric ovens, the internal temperature of the electric oven can be controlled between 50-300 °C with the thermostat. The oven interior is made of AISI 430 stainless steel. Removable chrome-plated slides inside the oven allow cooking at 3 different oven shelf levels. To increase the insulation of the oven, special molds with a thickness of 40 mm, resistant to heavy conditions and an ergonomic handle, and an oven door made of stainless steel produced by the press printing method were used. Stainless steel micro-hole oven burner provides maximum efficiency and increases oven temperature quickly. In 6-burner cookers, an oven of GN 2/1 size can be used, or optionally a large oven with an internal size of 1060x550x275 can be made. In the oven section of the galleys, heat is prevented from escaping with the door and the duct and slot system made by pressing against the door. Thus, the need for additional silicone gaskets used in ovens is eliminated. Each stove burner has cast iron to place pots or pans on the stove. The stove cast iron is dishwasher-safe thanks to its semi-polished and durable enamel coating.

Upper burners have 4 burners. The oven section can optionally be used as an electric static oven or gas static oven. Gas ovens have piezo lighter ignition. In gas open hearths and gas ovens, gas taps with safety devices and thermocouples are used for flame control. All cooktops and cooktops have 2 mm thick monoblock tops produced using special molds using the press printing method. Rounded corners on the top table increase durability and provide ease of cleaning. Burners made of specially designed brass material have high power, high combustion efficiency and low gas emission values. Thanks to the pilot flame system in the burners, it is possible to use the devices quickly and easily. With the thermostatic gas valve, the internal temperature of the gas oven can be controlled between 100-300 °C, and in electric ovens, the internal temperature of the electric oven can be controlled between 50-300 °C with the thermostat. The oven interior is made of AISI 430 stainless steel. Removable chrome-plated slides inside the oven allow cooking at 3 different oven shelf levels. To increase the insulation of the oven, special molds with a thickness of 40 mm, resistant to heavy conditions and an ergonomic handle, and an oven door made of stainless steel produced by the press printing method were used. Stainless steel micro-hole oven burner provides maximum efficiency and increases oven temperature quickly. The interior of the oven in a 4-burner cooker is GN 2/1. Trays suitable for this size can be used. In the oven section of the galleys, heat is prevented from escaping with the door and the duct and slot system made by pressing against the door. Thus, the need for additional silicone gaskets used in ovens is eliminated. Each stove burner has cast iron to place pots or pans on the stove. The stove cast iron is dishwasher-safe thanks to its semi-polished and durable enamel coating.

Upper burners have 4 burners. The oven section can optionally be used as an electric static oven or gas static oven. Gas ovens have piezo lighter ignition. In gas open hearths and gas ovens, gas taps with safety devices and thermocouples are used for flame control. All cooktops and cooktops have 2 mm thick monoblock tops produced using special molds using the press printing method. Rounded corners on the top table increase durability and provide ease of cleaning. Burners made of specially designed brass material have high power, high combustion efficiency and low gas emission values. Thanks to the pilot flame system in the burners, it is possible to use the devices quickly and easily. With the thermostatic gas valve, the internal temperature of the gas oven can be controlled between 100-300 °C, and in electric ovens, the internal temperature of the electric oven can be controlled between 50-300 °C with the thermostat. The oven interior is made of AISI 430 stainless steel. Removable chrome-plated slides inside the oven allow cooking at 3 different oven shelf levels. To increase the insulation of the oven, special molds with a thickness of 40 mm, resistant to heavy conditions and an ergonomic handle, and an oven door made of stainless steel produced by the press printing method were used. Stainless steel micro-hole oven burner provides maximum efficiency and increases oven temperature quickly. The interior of the oven in a 4-burner cooker is GN 2/1. Trays suitable for this size can be used. In the oven section of the galleys, heat is prevented from escaping with the door and the duct and slot system made by pressing against the door. Thus, the need for additional silicone gaskets used in ovens is eliminated. Each stove burner has cast iron to place pots or pans on the stove. The stove cast iron is dishwasher-safe thanks to its semi-polished and durable enamel coating.

Upper burners have 4 burners. The oven section can optionally be used as an electric static oven or gas static oven. Gas ovens have piezo lighter ignition. In gas open hearths and gas ovens, gas taps with safety devices and thermocouples are used for flame control. All cooktops and cooktops have 2 mm thick monoblock tops produced using special molds using the press printing method. Rounded corners on the top table increase durability and provide ease of cleaning. Burners made of specially designed brass material have high power, high combustion efficiency and low gas emission values. Thanks to the pilot flame system in the burners, it is possible to use the devices quickly and easily. With the thermostatic gas valve, the internal temperature of the gas oven can be controlled between 100-300 °C, and in electric ovens, the internal temperature of the electric oven can be controlled between 50-300 °C with the thermostat. The oven interior is made of AISI 430 stainless steel. Removable chrome-plated slides inside the oven allow cooking at 3 different oven shelf levels. To increase the insulation of the oven, special molds with a thickness of 40 mm, resistant to heavy conditions and an ergonomic handle, and an oven door made of stainless steel produced by the press printing method were used. Stainless steel micro-hole oven burner provides maximum efficiency and increases oven temperature quickly. The interior of the oven in a 4-burner cooker is GN 2/1. Trays suitable for this size can be used. In the oven section of the galleys, heat is prevented from escaping with the door and the duct and slot system made by pressing against the door. Thus, the need for additional silicone gaskets used in ovens is eliminated. Each stove burner has cast iron to place pots or pans on the stove. The stove cast iron is dishwasher-safe thanks to its semi-polished and durable enamel coating.

Upper burners have 4 burners. The oven section can optionally be used as an electric static oven or gas static oven. Gas ovens have piezo lighter ignition. In gas open hearths and gas ovens, gas taps with safety devices and thermocouples are used for flame control. All cooktops and cooktops have 2 mm thick monoblock tops produced using special molds using the press printing method. Rounded corners on the top table increase durability and provide ease of cleaning. Burners made of specially designed brass material have high power, high combustion efficiency and low gas emission values. Thanks to the pilot flame system in the burners, it is possible to use the devices quickly and easily. With the thermostatic gas valve, the internal temperature of the gas oven can be controlled between 100-300 °C, and in electric ovens, the internal temperature of the electric oven can be controlled between 50-300 °C with the thermostat. The oven interior is made of AISI 430 stainless steel. Removable chrome-plated slides inside the oven allow cooking at 3 different oven shelf levels. To increase the insulation of the oven, special molds with a thickness of 40 mm, resistant to heavy conditions and an ergonomic handle, and an oven door made of stainless steel produced by the press printing method were used. Stainless steel micro-hole oven burner provides maximum efficiency and increases oven temperature quickly. The interior of the oven in a 4-burner cooker is GN 2/1. Trays suitable for this size can be used. In the oven section of the galleys, heat is prevented from escaping with the door and the duct and slot system made by pressing against the door. Thus, the need for additional silicone gaskets used in ovens is eliminated. Each stove burner has cast iron to place pots or pans on the stove. The stove cast iron is dishwasher-safe thanks to its semi-polished and durable enamel coating.

In all electric cookers and cooktops, 1.5 mm thick 304 quality stainless steel monoblock top tables, produced using special molds and press printing method, are used, thus increasing the durability of the top table and ensuring ease of cleaning. The plates made of cast material are combined with the press-pressed upper table in a sealed manner. There is an overheat thermal in each hot plate. This thermal hot plate prevents damage to the hot plate by cutting off the electricity when it overheats, and automatically activates the system when the excessive heat disappears. Each hot plate has a 6-position switch that allows it to be controlled between 90-450 °C. Thanks to this temperature control, the user can perform applications such as cooking or holding. There are separately controllable lower and upper heaters in the oven section. With the 3-position switch, the lower heater, upper heater and lower and upper heater can be operated in the same positions. There is a thermostat that controls the oven internal temperature between 50-300 °C. The oven interior is made of AISI 430 stainless steel. Removable chrome-plated slides inside the oven allow cooking on 3 different shelf levels. In the oven section of electric cookers, heat is prevented from escaping with a door and a duct and slot system made by pressing against the door. Thus, the need for additional silicone gaskets used in ovens is eliminated. The interior of the oven in the 8090 electric cooker is GN 2/1. Trays suitable for this size can be used.

Electric 4 Square Plate Ship Model with Range Oven

Gas Closed Casting Range with Oven

4 Round Large Plate Ship Model with Range Oven

1.5 mm thick 304 quality stainless steel monoblock top tables, produced using special molds and press printing method, are used in all electric cookers and cooktops. Thus, the durability of the top table is increased and ease of cleaning is provided. The heat plates made of cast material are combined with the press-printed top plate in a leak-proof manner. Each heat plate has an overheat thermal. When this thermal heat plate overheats, it cuts off the electricity, preventing damage to the heat plate, and automatically activates the system when the excessive heat disappears. Each heat plate has a 6-position switch that allows it to be controlled between 90-450 °C. Thanks to this temperature control, the user can perform applications such as cooking or holding. There are separately controllable lower and upper heaters in the oven section. With the 3-position switch, the lower heater, upper heater and lower and upper heater can be operated in the same positions. There is a thermostat that controls the oven internal temperature between 50-300 °C. The oven interior is made of AISI 430 stainless steel. Removable chrome-plated slides inside the oven allow cooking on 3 different shelf levels. In the oven section of 8070 electric cookers, the heat is prevented from escaping with the door and the duct and slot system made by pressing against the door. Thus, the need for additional silicone gaskets used in ovens is eliminated. The interior of the oven in the 8070 electric cooker is GN 2/1. Trays suitable for this size can be used.

• Upper burners have 2 or 4 burners. The oven section can optionally be used as an electric static oven or gas static oven. Gas ovens have piezzo lighter ignition. • In gas open flame stoves and gas ovens, gas taps with safety devices and thermocouples are used for flame control. • Specially designed cast iron burners have high power, high combustion efficiency and low gas emission values. • Thanks to the pilot flame system in the burners, it is possible to use the devices quickly and easily. • With the thermostatic gas valve, the internal temperature of the gas oven can be controlled between 100-300 °C, and in electric ovens, the internal temperature of the electric oven can be controlled between 50-300 °C with the thermostat. • The oven interior is made of AISI 430 stainless steel. Removable chrome-plated slides inside the oven allow cooking at 3 different oven shelf levels. • 40 mm to increase oven insulation. Oven door made of stainless steel, produced by pressing method, with special molds with a handle that is resistant to heavy conditions and has an ergonomic structure, has been used. • Stainless steel micro-hole oven burner provides maximum efficiency and increases the oven temperature quickly. • In a 4-burner cooker, the interior of the oven is GN 2/1. Trays suitable for this size can be used. • In the oven section of 4-burner cookers, heat is prevented from escaping with a door and a duct and slot system made by pressing against the door. Thus, the need for additional silicone gaskets used in ovens is eliminated. • Each stove burner has cast iron for placing pots or pans on the stove.

• Upper burners have 2 or 4 burners. The oven section can optionally be used as an electric static oven or gas static oven. Gas ovens have piezzo lighter ignition. • In gas open flame stoves and gas ovens, gas taps with safety devices and thermocouples are used for flame control. • Specially designed cast iron burners have high power, high combustion efficiency and low gas emission values. • Thanks to the pilot flame system in the burners, it is possible to use the devices quickly and easily. • With the thermostatic gas valve, the internal temperature of the gas oven can be controlled between 100-300 °C, and in electric ovens, the internal temperature of the electric oven can be controlled between 50-300 °C with the thermostat. • The oven interior is made of AISI 430 stainless steel. Removable chrome-plated slides inside the oven allow cooking at 3 different oven shelf levels. • 40 mm to increase oven insulation. Oven door made of stainless steel, produced by pressing method, with special molds with a handle that is resistant to heavy conditions and has an ergonomic structure, has been used. • Stainless steel micro-hole oven burner provides maximum efficiency and increases the oven temperature quickly. • In a 4-burner cooker, the interior of the oven is GN 2/1. Trays suitable for this size can be used. • In the oven section of 4-burner cookers, heat is prevented from escaping with a door and a duct and slot system made by pressing against the door. Thus, the need for additional silicone gaskets used in ovens is eliminated. • Each stove burner has cast iron for placing pots or pans on the stove.