Countertop Ranges

The upper stove has 6 burners. Gas ovens have piezo lighter ignition. In gas open hearths and gas ovens, gas taps with safety devices and thermocouples are used for flame control. All cooktops and cooktops have 2 mm thick monoblock tops produced using special molds using the press printing method. Rounded corners on the top table increase durability and provide ease of cleaning. Burners made of specially designed brass material have high power, high combustion efficiency and low gas emission values. Thanks to the pilot flame system in the burners, it is possible to use the devices quickly and easily.

In all electric cookers and cooktops, 1.5 mm thick 304 quality stainless steel monoblock top tables, produced using special molds and press printing method, are used, thus increasing the durability of the top table and ensuring ease of cleaning. The plates made of cast material are combined with the press-pressed upper table in a sealed manner. There is an overheat thermal in each hot plate. This thermal hot plate prevents damage to the hot plate by cutting off the electricity when it overheats, and automatically activates the system when the excessive heat disappears. Each hot plate has a 6-position switch that allows it to be controlled between 90-450 °C. Thanks to this temperature control, the user can perform applications such as cooking or holding.

The upper stove has 2 burners. Gas ovens have piezo lighter ignition. In gas open hearths and gas ovens, gas taps with safety devices and thermocouples are used for flame control. All cooktops and cooktops have 2 mm thick monoblock tops produced using special molds using the press printing method. Rounded corners on the top table increase durability and provide ease of cleaning. Burners made of specially designed brass material have high power, high combustion efficiency and low gas emission values. Thanks to the pilot flame system in the burners, it is possible to use the devices quickly and easily.

In all electric cookers and cooktops, 1.5 mm thick 304 quality stainless steel monoblock top tables, produced using special molds and press printing method, are used, thus increasing the durability of the top table and ensuring ease of cleaning. The plates made of cast material are combined with the press-pressed upper table in a sealed manner. There is an overheat thermal in each hot plate. This thermal hot plate prevents damage to the hot plate by cutting off the electricity when it overheats, and automatically activates the system when the excessive heat disappears. Each hot plate has a 6-position switch that allows it to be controlled between 90-450 °C. Thanks to this temperature control, the user can perform applications such as cooking or holding.

The upper stove has 4 burners. Gas ovens have piezo lighter ignition. In gas open hearths and gas ovens, gas taps with safety devices and thermocouples are used for flame control. All cooktops and cooktops have 2 mm thick monoblock tops produced using special molds using the press printing method. Rounded corners on the top table increase durability and provide ease of cleaning. Burners made of specially designed brass material have high power, high combustion efficiency and low gas emission values. Thanks to the pilot flame system in the burners, it is possible to use the devices quickly and easily.

In all electric cookers and cooktops, 1.5 mm thick 304 quality stainless steel monoblock top tables, produced using special molds and press printing method, are used, thus increasing the durability of the top table and ensuring ease of cleaning. The plates made of cast material are combined with the press-pressed upper table in a sealed manner. There is an overheat thermal in each hot plate. This thermal hot plate prevents damage to the hot plate by cutting off the electricity when it overheats, and automatically activates the system when the excessive heat disappears. Each hot plate has a 6-position switch that allows it to be controlled between 90-450 °C. Thanks to this temperature control, the user can perform applications such as cooking or holding.

The upper stove has 4 burners. Gas ovens have piezo lighter ignition. In gas open hearths and gas ovens, gas taps with safety devices and thermocouples are used for flame control. All cooktops and cooktops have 2 mm thick monoblock tops produced using special molds using the press printing method. Rounded corners on the top table increase durability and provide ease of cleaning. Burners made of specially designed brass material have high power, high combustion efficiency and low gas emission values. Thanks to the pilot flame system in the burners, it is possible to use the devices quickly and easily.

1.5 mm thick 304 quality stainless steel monoblock top tables, produced using special molds and press printing method, are used in all electric cookers and cooktops. Thus, the durability of the top table is increased and ease of cleaning is provided. The heat plates made of cast material are combined with the press-printed top plate in a leak-proof manner. Each heat plate has an overheat thermal. When this thermal heat plate overheats, it cuts off the electricity, preventing damage to the heat plate, and automatically activates the system when the excessive heat disappears. Each heat plate has a 6-position switch that allows it to be controlled between 90-450 °C. Thanks to this temperature control, the user can perform applications such as cooking or holding. There are separately controllable lower and upper heaters in the oven section. With the 3-position switch, the lower heater, upper heater and lower and upper heater can be operated in the same positions. There is a thermostat that controls the oven internal temperature between 50-300 °C. The oven interior is made of AISI 430 stainless steel. Removable chrome-plated slides inside the oven allow cooking on 3 different shelf levels. In the oven section of 8070 electric cookers, the heat is prevented from escaping with the door and the duct and slot system made by pressing against the door. Thus, the need for additional silicone gaskets used in ovens is eliminated. The interior of the oven in the 8070 electric cooker is GN 2/1. Trays suitable for this size can be used.

1.5 mm thick 304 quality stainless steel monoblock top tables, produced using special molds and press printing method, are used in all electric cookers and cooktops. Thus, the durability of the top table is increased and ease of cleaning is provided. The heat plates made of cast material are combined with the press-printed top plate in a leak-proof manner. Each heat plate has an overheat thermal. When this thermal heat plate overheats, it cuts off the electricity, preventing damage to the heat plate, and automatically activates the system when the excessive heat disappears. Each heat plate has a 6-position switch that allows it to be controlled between 90-450 °C. Thanks to this temperature control, the user can perform applications such as cooking or holding. There are separately controllable lower and upper heaters in the oven section. With the 3-position switch, the lower heater, upper heater and lower and upper heater can be operated in the same positions. There is a thermostat that controls the oven internal temperature between 50-300 °C. The oven interior is made of AISI 430 stainless steel. Removable chrome-plated slides inside the oven allow cooking on 3 different shelf levels. In the oven section of 8070 electric cookers, the heat is prevented from escaping with the door and the duct and slot system made by pressing against the door. Thus, the need for additional silicone gaskets used in ovens is eliminated. The interior of the oven in the 8070 electric cooker is GN 2/1. Trays suitable for this size can be used.

Upper burners have 2 burners. In gas cooktops, gas taps with safety devices and thermocouples are used for flame monitoring. All cooktops have 1.5 mm thick top plates produced using special molds using the press printing method. Rounded corners on the top table increase durability and provide ease of cleaning. Burners made of specially designed cast materials have high power, high combustion efficiency and low gas emission values. Thanks to the pilot flame system in the burners, it is possible to use the devices quickly and easily. Each stove burner has cast iron to place pots or pans on the stove.

Upper burners have 4 burners. In gas cooktops, gas taps with safety devices and thermocouples are used for flame monitoring. All cooktops have 1.5 mm thick top plates produced using special molds using the press printing method. Rounded corners on the top table increase durability and provide ease of cleaning. Burners made of specially designed cast materials have high power, high combustion efficiency and low gas emission values. Thanks to the pilot flame system in the burners, it is possible to use the devices quickly and easily. Each stove burner has cast iron to place pots or pans on the stove.